The MAI pump is a very easy-to-use pump for mixture of cement, mainly for grout drilling with MAI-rods or similar anchoring work.
The pump is connected to water, a minimum 2 bars of pressure. The motor is electrical and must be plugged in to an electrical current. Cement is then added from the top of the machine.
Once the cement is poured in the mixer, water is injected through the nozzles. The two elements are mixed together creating a slurry that is pumped through an outlet via a 1” high pressure hose. VCT ratio is adjusted with the amount of water added. The whole mixing/pumping stages are performed automatically as the operator only needs to push the start button. A remote control is available.
The MAI-pump is very easy to disassemble for cleaning after completion of a job.
MAI pump m400NT
Pump capacity: 400-2000 i/m
Max pressure: 40 bar
Voltage: 400 V, 50 Hz, 25A
Size: 1730x570x960 mm